Warning ! steps are important.
for db2000/db2010:
1. go to empty board
2. select needed model
3. select needed cid
- select cid51 for all NEW SECURITY db2012 phones (w200/k320/latest W810/etc)
- select cid49 for all "modern" phones,
- select cid36 for "old" phones (k700,k500,s700,k300),
- select cid29 for ancient z1010
3. press recovery
5. if board is totally empty (new flash chip), select needed gdfs_in_ssw_format
6. select respective EROM (if phone need EROM) from EROMs folder
7. fill IMEI number, check WRITE OTP (it can be done only once, be careful)
8. press flash
phone now normal retail and can be serviced as any other phone.
for db2020.
1. go to empty tab
2. select any db2020 model
3. select cid49 (that is REQUIRED)
4. press recover
5. if board is totally empty (new flash chip), select needed gdfs_in_ssw_format
6. select respective EROM (better use k610_erom_cnv_brown2red.cry - works for any phone)
7. fill IMEI number, check WRITE OTP (it can be done only once, be careful)
8. press flash
phone now normal retail and can be serviced as any other phone.
edit:
a little example of emptyboard filling for db2020 :
count db2020gdfs_in_ssw_format_CID49_BROWN.ssw.cry as empty "template" of GDFS.
that template should be written on empty flash chip during emptyboard filling process.
then you can write gdfs in .binary format on semc tab, check phone and if all ok - close OTP.
- Code:
-
so, lets assume we have
1. k810 with empty flash chip
2. db2020gdfs_in_ssw_format_CID49_BROWN.ssw.cry
3. k810gdfs.bin
1. go to empty tab
2. select cid49, press recovery
3. add to fw tab k610_erom_cnv_brown2red.cry,
db2020gdfs_in_ssw_form at_CID49_BROWN.ssw.cry, press flash
4. go to semc tab, flash any situable main firmware
5. on semc tab, write k810gdfs.bin using "write gdfs" and misc. edit.
6. back to empty board
7. select cid49, press recovery
8. add to fw tab k610_erom_cnv_brown2red.cry,press flash
9. go to semc tab, flash complete firmware (main+fsimage+custpack)
OR just flash fsimage,situable to main,written on step4 +custpack
10. now check - phone should be able to turn on normally
11. finally, write IMEI and write OTP, for that
12. go to empty board,select cid49, press recovery
13. add to fw tab k610_erom_cnv_brown2red.cry,fill IMEI,
check "write OTP", press flash.
Best Regard
WinD