how to use imei patch in jaf

how to use imei patch in jaf
1. read phone info (dct-4 only)
2. click imei tool and select imei patch
3. enter 14 digit imei #
4. select mcu, the same version that you read on phone info.
5. wait for about 6 seconds and thats it.


Imei Patch Solution& Supporting Models Here

Firstly you must check the phone version. If the version it's supported then continue, if not you must flash it before continue.

Second step. When you click on IMEI Patch a new window it's suppossed to appear. You must write the new IMEI there, remember 15

digits
Now the JAF software will patch your phone.

The version of patched firmwares it's contained in the folder -->Program Files/Odeon/Jaf/Jaf IMEI Patch

Supported extra Firmwares for DCT4 Asic2 Patch

1100 Firmwares Supported-->All firmwares patched but NO SIGNAL
1110 " " -->3.42
1600 " " -->3.42-4.04-(5.03*)
2300 " " -->All firmwares patched but NO SIGNAL
2600 " " -->All firmwares patched but NO SIGNAL
2650 " " -->(6.19**)
3100 " " -->6.01-6.11
3120 " " -->6.11
3220 " " -->3.30-3.60
5140i " " -->4.04 or convert into 5140
6020 " " -->(4.10***) Without Network
6610 " " -->5.52
6310i " " -->7.00
7200 " " -->All firmwares patched and working
7210 " " -->All firmwares patched and working
7250 " " -->All firmwares patched and working
7260 " " -->3.36
8310 " " -->6.20 and any other version
8910i " " -->4.46